Resource type
CaMMP Issues
Data Type
Scale
Topic
Water Pollutant
16 records found
Discharge and water chemistry measurements from Tarland Burn at Coull (Scotland) (2000-2010)
Mean daily flow and water chemistry data collected from the Tarland Burn, recorded between 2000-2010. Water chemistry determinands measured include: total dissolved phosphorus (TDP), soluble reactive phosphorus (SRP), total phosphorous (TP), particulate phosphorus (PP),...
Source apportionment of annual nutrient and sediment loads to rivers in England and Wales, from the SEPARATE framework
Estimates of discharged loads of nitrogen, phosphorous and fine-grained sediments to rivers in England and Wales from multiple sector sources, reported at Water Framework Directive catchment scale, from the SEctor Pollutant AppoRtionment for the AquaTic Environment...
High resolution water quality, hydrological and ecological monitoring in the river Eden catchment (2011 - 2015) [DTC project]
The River Eden Demonstration Test Catchment (EdenDTC) monitored water quality, hydrology and ecology across 3 sub-catchments to assess the effectiveness of diffuse pollution mitigation measures. The focus areas are in the Thackthwaite, Newby and Pow catchments. Each...
SWAT (Soil and Water Assessment Tool)
SWAT is the product of over 40 years of research and is subject to ongoing development. The model is designed to simulate the effects of changes in land management practices, land use and climate on surface water and groundwater quality and quantity, sediments, nutrients,...
Case Study 4: Effectiveness of pollution control measures under scenarios of future climate and land cover change at the catchment scale.
Despite the uncertainty in future climate and land use, large-scale measures put in place today to improve water quality are likely to remain effective in the future in northeast Scotland. Dynamic models can provide useful indications of the likely lag time between...
Case Study 2: Effectiveness of land management policies and agri-environment interventions for reducing pollutant loads and maintaining environmental quality at the national scale.
The impacts of the suite of Countryside Stewardship options were reductions in national agricultural pollution of over 6% (nitrate) and 10% (phosphorus). Accounting for non-agricultural sources of pollution reduced the net overall impact of the options to 4% (nitrate)...
SEPA Sediment Monitoring sites
Dataset of 1076 sediment monitoring sites in Scotland measured by SEPA for a variety of purposes. The dataset consists of site locations in British National Grid or Lat/Long WGS84, describing aspects of each site and the monitoring activity including medium (river,...
High resolution water quality, hydrology and ecological monitoring data from the Hampshire Avon and Tamar (2011 - 2014) [DTC project]
High resolution datasets of ecological, hydrological and water quality monitoring at approx. 11 sites across the Hampshire Avon and Tamar Defra Test Catchment (DTC) sites between 2011 and 2014, for monitoring and assessing the effects of on-farm interventions on water...
High resolution water quality samples during storm events (2010-2014) [Wensum DTC]
Continuous measures of hydrochemical parameters of storm water from the Wensum Demonstration Test Catchment, in Norfolk, recorded between 2010 and 2014. Automatic ISCO samplers installed at 7 sites (aka monitoring kiosk A, B, C, D, E, F, M) in this catchment are triggered...
SAGIS (Source Apportionment GIS)
SAGIS was developed for UKWIR, with support from the Environment Agency, SEPA and Natural England, to analyse sources of chemicals at the river basin scale and identify measures to improve river, lake and estuary water quality. National data on the source of chemicals...
Case Study 1: Multiple pollutant and ecosystem services responses to land management policies and agri-environment interventions at the farm to catchment scale.
This case study examines potential trade-offs and co-benefits for a suite of ecosystem services at the farm to catchment scale that may be potential ‘by-products’ of an agri-environment scheme designed to reduce total multi-pollutant loads entering watercourses.
FARMSCOPER (Farm Scale Optimisation of Pollutant Emission Reductions)
Farmscoper is a decision support tool that allows an assessment of the cost and effectiveness of agricultural mitigation methods on multiple pollutants. It incorporates meta-models of a number of different pollutant models which have previously been used for government...
Case Study 7: Interpolation of model outputs and data from catchment to national scales and monitored to non-monitored sites
This case study uses a Dynamic Typology Tool (DTT) to combine spatially explicit datasets describing landscape character and management and identify homologous areas of agricultural potential, natural environment quality and risk. The DTT provides national coverage...
INCA-P (Integrated Catchments Model - Phosphorus dynamics)
INCA-P operates at a daily time step, tracking the stores and fluxes of water, sediment, dissolved and particulate P in both the land and in-stream phases of a river catchment. The model is spatially ‘semi-distributed’: the water course is split into reaches with associated...
LUCI (Land Utilisation & Capability Indicator)
LUCI explores the capability of a landscape to provide a variety of ecosystem services, such as agricultural production, flood and diffuse pollutant mitigation, carbon sequestration, habitat provision etc. The model is a second generation extension and accompanying...
SEPARATE (SEctor Pollutant AppoRtionment for the AquaTic Environment)
National scale nutrient and sediment source apportionment screening tool for England and Wales developed originally as part of Defra project WQ0223 (Developing a field toolkit for ecological targeting of agricultural diffuse pollution mitigation measures). SEPARATE...