Part of UKCEH UKCEH logo
UKCEH website
Stivanello, S.; Clark, D.; Adu-Bredu, S.; Haddad, M.; Hill, T.

Electrical resistance of trees and soil in Ankasa forest, Ghana, 2019

Download/Access
PLEASE NOTE: By accessing or using this dataset, you agree to the terms of the relevant licence agreement(s). You will ensure that this dataset is cited in any publication that describes research in which the data have been used.

This dataset is available under the terms of the Open Government Licence

Download the data
https://doi.org/10.5285/c46028c6-1d2b-4b40-a174-39ea3fee2499
Measurements of tree resistance to ground and adjacent soils in the Ankasa Conservation Area located in southwestern Ghana. Tree species were selected as representative of the dominant species with diameter at breast height (DBH) ranging from 17.8 to 77.8 cm. The selected 20 trees had DBH ranging from 17.8 to 77.8 cm. In addition, measurements were extended to a single liana (Connarus africanus) with 7.0 cm DBH. Data on tree and soil resistivity were collected on the same 20 trees for both wet (March) and dry (September) season campaigns in 2019.
Publication date: 2024-02-08
5 downloads *
725 views *

More information

View numbers valid from 08 February 2024 Download numbers valid from 20 June 2024 (information prior to this was not collected)

Format

Comma-separated values (CSV)

Spatial information

Study area
Spatial representation type
Tabular (text)
Spatial reference system
WGS 84 / Pseudo-Mercator

Temporal information

Temporal extent
2019-03-01    to    2019-09-30

Provenance & quality

Tree resistance to ground was measured using a Digital Earth Tester DET2/2 (Megger, AVO Ltd., Dover, England) and adapting the “Fall of Potential” method to trees. Measurements were conducted at 1.40 m and 0.70 m heights above ground level. The differences between these measurements heights were used to calculate the electrical properties of each tree stem. Soil resistance was measured using a Digital Earth Tester DET2/2 (Megger, AVO Ltd., Dover, England) using a Wenner array configuration of spikes with “line traverse method”. Surface soil moisture was measured using a SM150T sensor (Delta-T Devices Ltd, Cambridge, UK) for both dry and wet seasons at 5 cm depth.

Licensing and constraints

This dataset is available under the terms of the Open Government Licence

Cite this dataset as:
Stivanello, S.; Clark, D.; Adu-Bredu, S.; Haddad, M.; Hill, T. (2024). Electrical resistance of trees and soil in Ankasa forest, Ghana, 2019. NERC EDS Environmental Information Data Centre. https://doi.org/10.5285/c46028c6-1d2b-4b40-a174-39ea3fee2499

Correspondence/contact details

Dr Timothy Hill
University of Exeter
 t.c.hill@exeter.ac.uk

Authors

Stivanello, S.
University of Exeter
Clark, D.
Cardiff University
Adu-Bredu, S.
Forestry Research Institute of Ghana
Haddad, M.
Cardiff University
Hill, T.
University of Exeter

Other contacts

Rights holders
Cardiff University, University of Exeter
Custodian
NERC EDS Environmental Information Data Centre
 info@eidc.ac.uk
Publisher
NERC EDS Environmental Information Data Centre
 info@eidc.ac.uk

Additional metadata

Topic categories
biota
Keywords
Connarus africanus , Fall of potential , Ghana , Ground , resistance (biological) , tree , tropical forest
Funding
Natural Environment Research Council Award: NE/P001564/1
Last updated
06 January 2025 09:07